System.Net.Http.HttpRequestException: Response status code does not indicate success: 400 (BAD REQUEST).
   at System.Net.Http.HttpResponseMessage.EnsureSuccessStatusCode()
   at IncidentReporter.API.Helpers.SupersetClient.<PostGuestTokenAsync>d__15.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\SupersetClient.cs:line 95
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.API.Helpers.SupersetClient.<MintGuestTokenAsync>d__14.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Helpers\SupersetClient.cs:line 71
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.API.BLL.EmbedBll.<GetGuestTokenAsync>d__5.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\EmbedBll.cs:line 120


Failed to send log to Dhilog: NotFound | {"type":"about:blank","title":"Not Found","status":404,"detail":"Cannot POST /Log","instance":"/Log","error_code":"NOT_FOUND"}


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Unhandled Exception in Web API

System.InvalidOperationException: The given header was not found.
   at System.Net.Http.Headers.HttpHeaders.GetValues(String name)
   at IncidentReporter.API.Handlers.AcmAuthorise.GetToken(HttpActionContext actionContext) in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Handlers\AcmAuthorise.cs:line 214
   at IncidentReporter.API.Handlers.AcmAuthorise.OnActionExecuting(HttpActionContext actionContext) in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\Handlers\AcmAuthorise.cs:line 37
   at System.Web.Http.Filters.ActionFilterAttribute.OnActionExecutingAsync(HttpActionContext actionContext, CancellationToken cancellationToken)
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Unhandled Exception in Web Application

System.Web.HttpException (0x80004005): A potentially dangerous Request.Path value was detected from the client (:).
   at System.Web.HttpRequest.ValidateInputIfRequiredByConfig()
   at System.Web.HttpApplication.PipelineStepManager.ValidateHelper(HttpContext context)


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


System.Exception: User details not found for the given user and organisation.


Unhandled Exception in Web API

System.OperationCanceledException: The operation was canceled.
   at System.Threading.CancellationToken.ThrowOperationCanceledException()
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()


I_SSC OrganisationShortCode SiteShortCode InspectionTypeShortCode CurrentYear FiveDigitSerialNumber

T_SSC OrganisationShortCode TicketCategoryShortCode CurrentYear FiveDigitSerialNumber

P_SSC OrganisationShortCode SiteShortCode CompanyShortCode JobTypeShortCode CurrentYear FiveDigitSerialNumber

At_SSC OrganisationShortCode SiteShortCode TaskCategoryShortCode CurrentYear FiveDigitSerialNumber

Additonal risk control measures and scope for improvement to reduce the risk level (if psd score > 27)

H_SSC OrganisationShortCode SiteShortCode HiraTypeShortCode CurrentYear FiveDigitSerialNumber

M_SSC OrganisationShortCode SiteShortCode MocTypeShortCode CurrentYear FiveDigitSerialNumber

A_SSC OrganisationShortCode SiteShortCode AuditTypeShortCode CurrentYear FiveDigitSerialNumber

L_SSC OrganisationShortCode LibraryCategoryShortCode CurrentYear FiveDigitSerialNumber

P_SSC OrganisationShortCode SiteShortCode CurrentYear FiveDigitSerialNumber

IMF_SSC OrganisationShortCode SiteShortCode CategoryShortCode CurrentYear FiveDigitSerialNumber

IR_SSC OrganisationShortCode CategoryShortCode CurrentYear FiveDigitSerialNumber

HT_SSC OrganisationShortCode SiteShortCode HealthTypeShortCode CurrentYear FiveDigitSerialNumber

WP_SSC OrganisationShortCode SiteShortCode CategoryShortCode CurrentYear FiveDigitSerialNumber

SK OrganisationShortCode SiteShortCode SafetyKaizenTypeShortCode CurrentYear FiveDigitSerialNumber

ES_SSC OrganisationShortCode SiteShortCode CurrentYear FiveDigitSerialNumber

FIR_SSC OrganisationShortCode SiteShortCode CategoryShortCode CurrentYear FiveDigitSerialNumber


Unhandled Exception in Web Application


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Exception in Dhilog HTTP POST: An error occurred while sending the request.

Question: ?Pagination=true&PageNumber=1&PageLimit=10&SortingColumn=CreatedOn&SortingOrder=desc&SearchTerm=kura


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


(Expected) Day of return to work: (Date or Time)


*** MULTIPART FORM DATA / FILE UPLOAD (OMITTED FOR LOGGING) ***


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=616


Unhandled Exception in Web API

System.OperationCanceledException: The operation was canceled.
   at System.Threading.CancellationToken.ThrowOperationCanceledException()
   at System.Net.Http.HttpContentExtensions.<ReadAsAsyncCore>d__0`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.ModelBinding.FormatterParameterBinding.<ExecuteBindingAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Web.Http.Controllers.HttpActionBinding.<ExecuteBindingAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()


Question: ?SiteId=617&SortingColumn=Name&SortingOrder=Asc


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=617


Question: ?SiteId=898&SortingColumn=Name&SortingOrder=Asc


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=898


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Incoming Inspection - Receipt & Material Details

Incoming Inspection - Dimensional / CTQ Inspection

Incoming Inspection - MTC / Material Property Verification

Incoming Inspection - Inspection Disposition

In-Process Inspection - Production & Inspection Details

In-Process Inspection - Pre-Process Verification

In-Process Inspection - Measurement / CTQ Inspection

In-Process Inspection - Welding Checks (complete when applicable)

In-Process Inspection - Heat Treatment Checks

In-Process Inspection - Process Decision

Final Inspection - Product & Batch Information

Final Inspection - Previous Process / Quality Gate Verification

Final Inspection - Final Dimensional / CTQ Inspection

Final Inspection - Functional / Special Testing

Final Inspection - Marking, Packaging & Final Disposition


Question: ?OrgId=258&StartDate=2026-08-18&EndDate=2026-08-18


Question: ?sortingColumn=LocationAddress&sortingOrder=asc&pageNumber=1&pageLimit=10


Question: ?Pagination=true&PageNumber=1&PageLimit=10&SortingColumn=CreatedOn&SortingOrder=desc&SearchTerm=k


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?SortingColumn=Name&SortingOrder=Asc&SiteId=833&SiteId=840&SiteId=831&SiteId=834&SiteId=899


Question: ?ModuleName=Tasks&SiteId=833&AcmModuleId=27


Question: ?ModuleName=Tasks&siteId=840&siteId=831&siteId=833&siteId=834


1.Vehicles & equipment entering inside has working warning lights and alarms.

2.Workers maintaining safe distances from moving vehicles�

3.Internal walking surfaces free from potholes, cracks etc.

4.Conveyor pulley drive having appropriate cover/guard.

5.Chemical binders used have associated Safety Data Sheets

6.Adequate ventilation is in operational areas

7.Dry pile of sand and a shovel�readily available to control metal spills or fires (never use water on a metal fire)

9.Hand-railing of pits are available and have proper stability

10.Walkway cleared, no trip hazards, housekeeping maintained

11.Area having adequate lighting & visibility

13.Crane slings, chains, and hooks are in a good condition

15.Hand-railing is available in Quenching water reservoir

16.Crane slings, chains, and hooks are in a good condition

17.Area having adequate lighting & visibility

18.Adequate ventilation and illumination in operational areas

19.Using dual guage industrial Regulator for compressed gas.

20.Flash back arrestor is provided for LPG cylinder

21.Flash back arrestor provided on torch side

22.Hammer is ok and head intact properly.

23.Casting materials stacked properly and within man height.

24.Adequate ventilation and illumination in operational areas

25.Crane slings, chains, and hooks are in a good condition

26.All machines rotatory parts properly guarded

27.Adequate ventilation and illumination in operational areas

28.Crane slings, chains, and hooks are in a good condition

29.Casted finished materials stacked properly.

30.Adequate ventilation and illumination in operational areas

31.Crane slings, chains, and hooks are in a good condition

32.Portable tools are intact and safe to use.

33.All grinding machines having wheel guard.

34.Adequate ventilation and illumination in operational areas

35.Painter using proper nose mask and hand gloves

36.Pre-check of hydra crane carried out seperately.

37.Proper disposal of waste done regularly

39.Empty oil drums place outside the room

40.Adequate ventilation and illumination in area.�

41.Adequate ventilation and illumination in area.

42.Waste containers are emptied regularly

43.Mosquito repellent placed at suitable location

44.Hygienic condition inside kitchen area maintained.

45.Gas cylinders stacked outside the cooking area.�

46.Adequate ventilation and illumination in area.

47.Emergency exits free of boxes, materials or clutter.

48.Fire extinguishers are present, functional, and accessible

49.Storage racks are not sagging and damage to prevent collapse.�

50.Chemicals and flammables are lebelled and on lower rack.

51.Availability of insulated/Rubber Mat In-front of Panel.

53.No oil & air leakage observed in compressor area

54.Fire extinguishers are present, functional, and accessible

55.Doors are closed and restricted for unauthorised person.

56.Electrical shock treatment chart displayed.

57.All drains and trenches in vicinity are covered.�

59.Chemical spill kit is placed appropritely.

60.Are safety data sheets available for every hazardous chemical?

61.Ensure chemicals are properly labeled, segregated, and stored securely.

62.The foam & DCP type fire extinguisher is available

63.No physical damages observed in cable

64.30 mA ELCB / RCCB / RCD are in working condition

65.Confirm equipment has three-prong plugs and is properly grounded


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?OrgID=258&LocationId=831&LocationId=833&LocationId=834&LocationId=840


An Investigation record will show up here as soon as created for a record.

How many peoples are involved & their Details (Name & designation)

(Expected) Day of return to work: (Date or Time)

test


test


Question: ?SortingColumn=Name&SortingOrder=Asc&SiteId=833


Question: ?ModuleName=Tickets&SiteId=833&SiteId=840&SiteId=831&SiteId=834&SiteId=899&AcmModuleId=12


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


System.InvalidCastException: Null object cannot be converted to a value type.
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at Newtonsoft.Json.Linq.Extensions.Convert[T,U](T token)
   at IncidentReporter.API.BLL.CategoryConfigurationsBll.ExtractModuleAssociationConfigs(String configJson, Int32 orgId, Int32 sourceModuleId, Int32 categoryId, Int32 userId) in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\CategoryConfigurationsBll.cs:line 652
   at IncidentReporter.API.BLL.CategoryConfigurationsBll.<UpdateCategoryConfigurationAsync>d__7.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\CategoryConfigurationsBll.cs:line 308


Unhandled Exception in Web API


Unhandled Exception in Web API

System.OperationCanceledException: The operation was canceled.
   at System.Threading.CancellationToken.ThrowOperationCanceledException()
   at System.Web.Http.Filters.ActionFilterAttribute.<CallOnActionExecutedAsync>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Filters.ActionFilterAttribute.<ExecuteActionFilterAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


1.Is air compressor physically in good condition with TPI certificate?

2.Is motor physical condition is good and guard is provided to rotary part?

3.Is inspection date and due date was marked properly and visible?

5.Is pressure gauge was free from defect and working in condition with calibration as per requirement?

6.Is safety valve was in working condition?

7.Is all other valves also tested and inspected as per legal requirements?

8.Is machine guarding was in good condition and attached all time while in operation?

9.Is electrical connection allowed through industrial plug only?

10.Is all power cables are free from defects?

1.Free Air Delivery (FAD) < 90% of rated capacity. IS 5456 � Method of Testing Air Compressors

2.Final discharge pressure not achieved (e.g., <7 bar for a 7-bar unit). IS 5456

3.Air leakage from piping, joints, tank, or fittings. IS 5456 / IS 10437 � Maintenance Code

4.Oil carryover > 5 mg/m� (for oil-lubricated compressors). IS 10437

5.Excessive vibration or abnormal noise. IS 5456

6.Pressure drop > 10% across air filter or aftercooler. IS 5456

7.Motor current exceeds 110% of rated full load. IS 325 � Electric Motors

8.Insulation resistance < 1 MO (motor windings). IS 325 / IS 900

9.Outlet air temperature > 15�C above ambient (without dryer) IS 5456

10.Cooling system not functioning or overheating. IS 5456

11.Faulty pressure or temperature gauge. IS 3624 � Bourdon Tube Pressure Gauges


Question: ?Pagination=true&PageNumber=1&PageLimit=10&SortingColumn=CreatedOn&SortingOrder=desc&SearchTerm=


How many peoples are involved & their Details (Name & designation)

test


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


Question: ?PageNumber=1&PageLimit=10&SearchTerm=&SortingColumn=PermitToWorkStartDate&SortingOrder=desc&IsAdminUser=true


MySql.Data.MySqlClient.MySqlException (0x80004005): Fatal error encountered during command execution. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Fatal error encountered attempting to read the resultset. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at MySql.Data.MySqlClient.TimedStream.Read(Byte[] buffer, Int32 offset, Int32 count)
   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)
   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()
   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()
   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()
   at MySql.Data.MySqlClient.NativeDriver.GetResult(Int32& affectedRow, Int64& insertedId)
   at MySql.Data.MySqlClient.Driver.NextResult(Int32 statementId, Boolean force)
   at MySql.Data.MySqlClient.MySqlDataReader.NextResult()
   at MySql.Data.MySqlClient.MySqlDataReader.NextResult()
   at MySql.Data.MySqlClient.MySqlCommand.ExecuteReader(CommandBehavior behavior)
   at MySql.Data.MySqlClient.MySqlCommand.ExecuteReader(CommandBehavior behavior)
   at System.Data.Common.DbCommand.ExecuteDbDataReaderAsync(CommandBehavior behavior, CancellationToken cancellationToken)
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Dapper.SqlMapper.<QueryMultipleAsync>d__57.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.DAL.Repositories.PtwRepo.<>c__DisplayClass54_0.<<GetAllPermitToWork>b__1>d.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.DAL\Repositories\PtwRepo.cs:line 2418
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.DAL.Repositories.BaseRepo.<ExecuteQueryAsync>d__7`1.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.DAL\Repositories\BaseRepo.cs:line 0
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.DAL.Repositories.PtwRepo.<GetAllPermitToWork>d__54.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.DAL\Repositories\PtwRepo.cs:line 2416
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at IncidentReporter.API.BLL.PtwBLL.<GetAllPermitToWork>d__26.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\PtwBLL.cs:line 2676


Property Damage

Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

If yes, please mention the name of the hospital where the victim is receiving treatment including the Hospital location.

1.How did the incident happen? (Be as detailed as possible)

2.Were there any witnesses to this incident?

4.Witness statements: (Including Name, Designation, Contractor details, etc.)

5.What activities were being carried out at the time and any equipment involved (including make, model, serial no)

6.Was there anything unusual or different about the working conditions at the time of the incident, such as the weather or an open day:make, model, serial no) (Copy)

7.Did a lack of competency or training contribute to this incident?

8.Was there a risk assessment /SOP/Method statement for the task?

9.Did the risk assessment/SOP/MOS cover all aspects of the task?

10.Was it being followed? (Attached supporting documents)

11.Was safety equipment and/or personal protective equipment provided?

12.Was the equipment suitable for the task and being used correctly?

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

17(a).Why did the incident happen / detailed root cause? (Use the Five Why�s technique to identify root causes)

18.Possible root causes of the accidents/ Incident:

Design Flaws: Errors or deficiencies in the construction plans and designs.

Drug or Alcohol Use: Substance abuse by workers on the job can impair judgment and coordination, leading to accidents.

Environmental Factors: Weather conditions, such as rain, snow, or high winds, can contribute to accidents.

Equipment Failure: Mechanical failure or malfunction of construction equipment or tools.

Human Error: Mistakes made by workers or equipment operators due to fatigue, distraction, or inexperience.

Inadequate Emergency Response: A lack of preparedness or inadequate response to accidents when they occur.

Inadequate Inspection/Maintenance: Failure to regularly inspect and maintain equipment or structures can lead to accidents.

Inadequate Personal Protective Equipment (PPE): Workers not wearing the necessary PPE for their tasks.

Inadequate Planning: Poorly planned construction projects may lack proper risk assessments and safety measures.

Inadequate Safety Culture: A lack of commitment to safety from management or a "get the job done at all costs" attitude.

Inadequate Supervision: Insufficient oversight by supervisors can result in unsafe practices or shortcuts being taken.

Inadequate Training: Usage of equipment without proper training can result in accidents.

Lack of Training: Workers may not have received proper training for their tasks, leading to errors and accidents.

Material Defects: Low-quality or defective construction materials can lead to structural failures or accidents.

Poor Communication: Miscommunication between workers, supervisors, or others can lead to misunderstandings.

Poor Housekeeping: Disorganized work areas can create hazards and increase the likelihood of accidents.

Stress and Fatigue: Long working hours, tight deadlines, and high-pressure situations can contribute to worker stress and fatigue.

Subcontractor Issues: Problems with subcontractors, including their qualifications, adherence to safety standards, or communication with the primary contractor.

Unsafe Work Practices: Workers not following established safety procedures or taking unnecessary risks.

Violations: Failure to comply with site safety regulations and standards.

Horizontal Deployment of Preventive Actions With in the Site

Horizontal Deployment of Preventive Actions Across the Sites

Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

2.Were there any witnesses to this incident?

10.Was it being followed? (Attached supporting documents)

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

18.Possible root causes of the accidents/ Incident:


Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

If yes, please mention the name of the hospital where the victim is receiving treatment including the Hospital location.

1.How did the incident happen? (Be as detailed as possible)

2.Were there any witnesses to this incident?

4.Witness statements: (Including Name, Designation, Contractor details, etc.)

5.What activities were being carried out at the time and any equipment involved (including make, model, serial no)

6.Was there anything unusual or different about the working conditions at the time of the incident, such as the weather or an open day:make, model, serial no) (Copy)

7.Did a lack of competency or training contribute to this incident?

8.Was there a risk assessment /SOP/Method statement for the task?

9.Did the risk assessment/SOP/MOS cover all aspects of the task?

10.Was it being followed? (Attached supporting documents)

11.Was safety equipment and/or personal protective equipment provided?

12.Was the equipment suitable for the task and being used correctly?

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

17(a).Why did the incident happen / detailed root cause? (Use the Five Why�s technique to identify root causes)

18.Possible root causes of the accidents/ Incident:

Design Flaws: Errors or deficiencies in the construction plans and designs.

Drug or Alcohol Use: Substance abuse by workers on the job can impair judgment and coordination, leading to accidents.

Environmental Factors: Weather conditions, such as rain, snow, or high winds, can contribute to accidents.

Equipment Failure: Mechanical failure or malfunction of construction equipment or tools.

Human Error: Mistakes made by workers or equipment operators due to fatigue, distraction, or inexperience.

Inadequate Emergency Response: A lack of preparedness or inadequate response to accidents when they occur.

Inadequate Inspection/Maintenance: Failure to regularly inspect and maintain equipment or structures can lead to accidents.

Inadequate Personal Protective Equipment (PPE): Workers not wearing the necessary PPE for their tasks.

Inadequate Planning: Poorly planned construction projects may lack proper risk assessments and safety measures.

Inadequate Safety Culture: A lack of commitment to safety from management or a "get the job done at all costs" attitude.

Inadequate Supervision: Insufficient oversight by supervisors can result in unsafe practices or shortcuts being taken.

Inadequate Training: Usage of equipment without proper training can result in accidents.

Lack of Training: Workers may not have received proper training for their tasks, leading to errors and accidents.

Material Defects: Low-quality or defective construction materials can lead to structural failures or accidents.

Poor Communication: Miscommunication between workers, supervisors, or others can lead to misunderstandings.

Poor Housekeeping: Disorganized work areas can create hazards and increase the likelihood of accidents.

Stress and Fatigue: Long working hours, tight deadlines, and high-pressure situations can contribute to worker stress and fatigue.

Subcontractor Issues: Problems with subcontractors, including their qualifications, adherence to safety standards, or communication with the primary contractor.

Unsafe Work Practices: Workers not following established safety procedures or taking unnecessary risks.

Violations: Failure to comply with site safety regulations and standards.


System.InvalidCastException: Null object cannot be converted to a value type.
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at Newtonsoft.Json.Linq.Extensions.Convert[T,U](T token)
   at IncidentReporter.API.BLL.CategoryConfigurationsBll.ExtractModuleAssociationConfigs(String configJson, Int32 orgId, Int32 sourceModuleId, Int32 categoryId, Int32 userId) in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\CategoryConfigurationsBll.cs:line 652
   at IncidentReporter.API.BLL.CategoryConfigurationsBll.<CreateCategoryConfigurationAsync>d__5.MoveNext() in C:\GitLab-Runner\builds\27n6lYj0J\0\incident-reporter\incident-reporter-api\IncidentReporter\IncidentReporter.API\BLL\CategoryConfigurationsBll.cs:line 150

LTI

Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

If yes, please mention the name of the hospital where the victim is receiving treatment including the Hospital location.

1.How did the incident happen? (Be as detailed as possible)

2.Were there any witnesses to this incident?

4.Witness statements: (Including Name, Designation, Contractor details, etc.)

5.What activities were being carried out at the time and any equipment involved (including make, model, serial no)

6.Was there anything unusual or different about the working conditions at the time of the incident, such as the weather or an open day:

7.Did a lack of competency or training contribute to this incident?

8.Was there a risk assessment /SOP/Method statement for the task?

9.Did the risk assessment/SOP/MOS cover all aspects of the task?

10.Was it being followed? (Attached supporting documents)

11.Was safety equipment and/or personal protective equipment provided?

12.Was the equipment suitable for the task and being used correctly?

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

17(a).Why did the incident happen / detailed root cause? (Use the Five Why�s technique to identify root causes)

18.Possible root causes of the accidents/ Incident:

Design Flaws: Errors or deficiencies in the construction plans and designs.

Drug or Alcohol Use: Substance abuse by workers on the job can impair judgment and coordination, leading to accidents.

Environmental Factors: Weather conditions, such as rain, snow, or high winds, can contribute to accidents.

Equipment Failure: Mechanical failure or malfunction of construction equipment or tools.

Human Error: Mistakes made by workers or equipment operators due to fatigue, distraction, or inexperience.

Inadequate Emergency Response: A lack of preparedness or inadequate response to accidents when they occur.

Inadequate Inspection/Maintenance: Failure to regularly inspect and maintain equipment or structures can lead to accidents.

Inadequate Personal Protective Equipment (PPE): Workers not wearing the necessary PPE for their tasks.

Inadequate Planning: Poorly planned construction projects may lack proper risk assessments and safety measures.

Inadequate Safety Culture: A lack of commitment to safety from management or a "get the job done at all costs" attitude.

Inadequate Supervision: Insufficient oversight by supervisors can result in unsafe practices or shortcuts being taken.

Inadequate Training: Usage of equipment without proper training can result in accidents.

Lack of Training: Workers may not have received proper training for their tasks, leading to errors and accidents.

Material Defects: Low-quality or defective construction materials can lead to structural failures or accidents.

Poor Communication: Miscommunication between workers, supervisors, or others can lead to misunderstandings.

Poor Housekeeping: Disorganized work areas can create hazards and increase the likelihood of accidents.

Stress and Fatigue: Long working hours, tight deadlines, and high-pressure situations can contribute to worker stress and fatigue.

Subcontractor Issues: Problems with subcontractors, including their qualifications, adherence to safety standards, or communication with the primary contractor.

Unsafe Work Practices: Workers not following established safety procedures or taking unnecessary risks.

Violations: Failure to comply with site safety regulations and standards.

Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

2.Were there any witnesses to this incident?

10.Was it being followed? (Attached supporting documents)

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

18.Possible root causes of the accidents/ Incident:


Work area In-charge (Name & Designation)

Injured person(S) Belongs (Name of Contractor / Client)

Is any further treatment required for the injured person?

If yes, please mention the name of the hospital where the victim is receiving treatment including the Hospital location.

1.How did the incident happen? (Be as detailed as possible)

2.Were there any witnesses to this incident?

4.Witness statements: (Including Name, Designation, Contractor details, etc.)

5.What activities were being carried out at the time and any equipment involved (including make, model, serial no)

6.Was there anything unusual or different about the working conditions at the time of the incident, such as the weather or an open day:

7.Did a lack of competency or training contribute to this incident?

8.Was there a risk assessment /SOP/Method statement for the task?

9.Did the risk assessment/SOP/MOS cover all aspects of the task?

10.Was it being followed? (Attached supporting documents)

11.Was safety equipment and/or personal protective equipment provided?

12.Was the equipment suitable for the task and being used correctly?

14.Was PPE compatible with another PPE used?

16.What are the investigation findings for this incident?

17(a).Why did the incident happen / detailed root cause? (Use the Five Why�s technique to identify root causes)

18.Possible root causes of the accidents/ Incident:

Design Flaws: Errors or deficiencies in the construction plans and designs.

Drug or Alcohol Use: Substance abuse by workers on the job can impair judgment and coordination, leading to accidents.

Environmental Factors: Weather conditions, such as rain, snow, or high winds, can contribute to accidents.

Equipment Failure: Mechanical failure or malfunction of construction equipment or tools.

Human Error: Mistakes made by workers or equipment operators due to fatigue, distraction, or inexperience.

Inadequate Emergency Response: A lack of preparedness or inadequate response to accidents when they occur.

Inadequate Inspection/Maintenance: Failure to regularly inspect and maintain equipment or structures can lead to accidents.

Inadequate Personal Protective Equipment (PPE): Workers not wearing the necessary PPE for their tasks.

Inadequate Planning: Poorly planned construction projects may lack proper risk assessments and safety measures.

Inadequate Safety Culture: A lack of commitment to safety from management or a "get the job done at all costs" attitude.

Inadequate Supervision: Insufficient oversight by supervisors can result in unsafe practices or shortcuts being taken.

Inadequate Training: Usage of equipment without proper training can result in accidents.

Lack of Training: Workers may not have received proper training for their tasks, leading to errors and accidents.

Material Defects: Low-quality or defective construction materials can lead to structural failures or accidents.

Poor Communication: Miscommunication between workers, supervisors, or others can lead to misunderstandings.

Poor Housekeeping: Disorganized work areas can create hazards and increase the likelihood of accidents.

Stress and Fatigue: Long working hours, tight deadlines, and high-pressure situations can contribute to worker stress and fatigue.

Subcontractor Issues: Problems with subcontractors, including their qualifications, adherence to safety standards, or communication with the primary contractor.

Unsafe Work Practices: Workers not following established safety procedures or taking unnecessary risks.

Violations: Failure to comply with site safety regulations and standards.


Hand railing was found missing in rig carrier ladder.


Unhandled Exception in Web Application


Observation- Rain water is falling on the A,B,C &D bay workplace.
Responsible Department - civil
Location- A,B,C,D bay
Corrective Action- Needs to be roof shed repair
Category-B


Question: ?siteId=833&siteId=840&siteId=831&siteId=834&siteId=899


Question: ?SortingColumn=Name&SortingOrder=Asc&SiteId=831


Question: ?PageNumber=1&PageLimit=10&SimilarIncidentHistory=true


Question: ?OrgId=258&SortingColumn=TaskTitle&SortingOrder=asc&siteId=831


Question: ?ModuleName=Tickets&SiteId=831&AcmModuleId=12&categoryIds=1710


Question: ?ModuleName=Tickets&SiteId=831&AcmModuleId=12


Question: ?ModuleName=Safety+Alerts&AcmModuleId=77&siteId=840&categoryIds=100184&isActive=true


Incoming Inspection - Receipt & Material Details

Incoming Inspection - Dimensional / CTQ Inspection

Incoming Inspection - MTC / Material Property Verification

Incoming Inspection - Inspection Disposition

In-Process Inspection - Production & Inspection Details

In-Process Inspection - Pre-Process Verification

In-Process Inspection - Measurement / CTQ Inspection

In-Process Inspection - Welding Checks (complete when applicable)

In-Process Inspection - Heat Treatment Checks

In-Process Inspection - Process Decision

Final Inspection - Product & Batch Information

Final Inspection - Previous Process / Quality Gate Verification

Final Inspection - Final Dimensional / CTQ Inspection

Final Inspection - Functional / Special Testing

Final Inspection - Marking, Packaging & Final Disposition


Cause of occurrence - Find out root cause by using "5 why" method

Preventive action taken to prevent reoccurrence

Mention other categories of near miss, if any


Question: ?SortingColumn=Name&SortingOrder=Asc&SiteId=882&SiteId=912&SiteId=881&SiteId=886&SiteId=884&SiteId=883&SiteId=889&SiteId=888&SiteId=885


Question: ?siteId=882&siteId=912&siteId=881&siteId=886&siteId=884&siteId=883&siteId=889&siteId=888&siteId=885


Hydra Contacted DG Body While Reversing During Material Shifting

� Deploy banksman/spotter during Hydra reversing and maneuvering. � Maintain safe clearance from DGs, structures and equipment. � Mark designated movement, turning and exclusion zones. � Ensure clear operator visibility; stop if visibility is obstructed. � Include reversing hazards in JSA/HIRA and ensure supervisor monitoring.

The Hydra was reversed too close to the DG while negotiating the turning point, resulting in inadequate clearance between the Hydra and the DG.

� Maintain safe clearance from structures and equipment. � Use a banksman during reversing, especially in congested areas. � Stop if visibility is restricted or the path is unclear. � Maneuver slowly and carefully at turning points. � Keep planned vehicle routes and turning areas obstruction-free. � Stop immediately if safe clearance cannot be confirmed.


� Maintain safe clearance from structures and
equipment. � Use a banksman during reversing,
especially in congested areas. � Stop if visibility is
restricted or the path is unclear. � Maneuver slowly and
carefully at turning points. � Keep planned vehicle
routes and turning areas obstruction-free. � Stop
immediately if safe clearance cannot be confirmed.

dsfdsfsdfsd


dsfdsfsdfsd


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=845


Question: ?SiteId=846&SortingColumn=Name&SortingOrder=Asc


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=846


Question: ?SiteId=900&SortingColumn=Name&SortingOrder=Asc


Question: ?ModuleName=Tickets&AcmModuleId=12&siteId=900